White Card Training Course coming soon
Simple Instruction will soon be offering White Card training courses on the Northern Beaches of Sydney. We have been delivering First Aid and CPR Training to the locals on the Northern Beaches for over 10 years we are excited to be moving into the construction white card courses. All courses will be held at the Dee Why RSL.
CPCCWHS1001 (NSW) Prepare to work safely in the construction industry
STUDENT INFORMATION
Award issued
CPCCWHS1001 Prepare to work safely in the construction industry
Our obligation to you
We are required to provide clear evidence to enable you to decide if this course is suitable for you.
This course teaches the skills and knowledge required to work safely in the construction industry.
Allens Training Pty Ltd RTO 90909 is responsible for the quality of the training and assessment and will be issuing the statement of attainment for this unit even if the training is provided by an authorised third party.
Choosing a training or education provider
The Australian Skills Quality Authority (ASQA) has developed a fact sheet to allow you to be fully informed about your decision to enroll in a course of study. We recommend reading this information prior to enrolling. It is available by clicking here.
Are there physical requirements for this course?
It is important to note that there are physical standards which relate to the level of performance required when undertaking accredited training.One requirement of the training package is that you are to be assessed as physically capable of donning and removing PPE correctly.
There can be no exceptions to these Australian Government requirements that are clearly written into the Training Package. Therefore, students who are unable to satisfy the physical requirements of the course cannot be deemed competent or issued with a statement of attainment, even if the qualification is a necessary part of their employment conditions.
Resources that will be available for this course
SafeWork NSW mandated assessments – version 1.2 19JUN 2018
Construction induction manual
Examples of workplace forms, plans and instructions
Examples of signage used on construction sites
PPE – Eye protection, Hearing protection, Hard hat, High visibility retro reflective vest, Dust mask
DETERMINING AMOUNT OF TRAINING – TARGET STUDENT AND COURSE DELIVERY OPTIONS
Student cohort (types of students)
Allens Training Pty Ltd is required to determine the amount of training they provide to each student, with regard to the existing skills, knowledge and experience of the student. This is achieved by identifying the cohort category or the student undertaking the proposed training and also the mode/s of delivery being provided. Skill levels will vary in relation to the type of student or ‘cohort’.
Allens Training Pty Ltd have identified the cohorts as students new to the training or returning to the industry.
Initial training and modes of delivery (students new to the training)
Initial training is intended for students who have no prior training or experience. For example, job seekers, school leavers, those wanting a change in career etc.
Where the student cohort consists of new entrants or inexperienced workers, we ensure that we give them the opportunity to fully absorb the required knowledge and to develop skills over time in the different contexts they would experience in the workplace.
This may require a longer time-frame than for those students with significant training/industry experience.
Course times
IMPORTANT INFORMATION TO STUDENTS AS FROM 19/07/2019– Students who do not live in Western Australia or Tasmania are no longer able to complete this training online.
What does competency-based training actually mean?
A competency-based training environment is centered on demonstrated competence against industry-defined standards of performance. Competency-based training is the concept that individuals learn at different rates as well as through different modes and different environments and that the skills and knowledge that a student has acquired previously are able to be formally recognised.
Amount of training and the AQF volume of learning
The AQF Volume of Learning describes how long a student, who does not hold any competencies identified in the qualification, would normally take to develop all of the required skills and knowledge at that qualification level. The amount of training comprises the formal learning activities that are provided to a student to enable them to meet the requirements of each training product and gain the skills and knowledge specified in the relevant training product.
Recognition or any prior learning or previous courses
Upon enrolment, you are given the opportunity to upload your previous certificate and based on that evidence, the course can be modified based on your previous knowledge. There is a currency requirement to be able to demonstrate skills such as using PPE.
We need to identify any support you require to complete this course
Upon enrolment, we will give you an opportunity to provide information on your language, literacy and numeracy skills to complete this course. There is also the opportunity to provide details and communicate any special needs or support requirements you may have. Assistance can be sought from our student support officer at Allens Training Pty Ltd by phoning 1300 559 064.
We provide equitable access to all required educational and support services, so that no student is disadvantaged to be able to enroll into this course regardless of their mode of study or location. Students can organise to meet with their trainer on a one-to-one basis for additional support, plus email and phone contact.
It’s important to note that there is a physical requirement to complete correctly fitting PPE.
Unique Student Identifier (USI)
Completing any vocational education course in Australia, it is a requirement for you to obtain and supply a USI. This is obtainable from usi.gov.au If a USI is not supplied and verified with usi.gov.au a certificate cannot be issued to you.
If you are under 18 years of age
It is a requirement that parental/guardian consent is obtained for students under the age of 18 to be able to participate in a course. The form for this can be found here.
Course fees
This course may be delivered by way of partnership arrangements with your local trainer. The course fee will be paid direct to the trainer (the partner organisation). This course is usually arranged by the employer of a workgroup and the employer can be invoiced for the training. If the employer does not arrange the training, or the employer does not agree to fund the training, training fees must be paid by the individual student direct to the trainer.
All partners of Allens Training Pty Ltd will be required to meet minimum resource and facility requirements and course fees are available at the time of enrolment. Course fees will be communicated to you prior to enrolment.
Funding and work placement arrangements
There are no funding or work placements associated with this course.
Foundation skills required
Foundation skills are the underpinning skills required for participation in the workplace, the community and in adult education and training.
Learning – to learn to work safely in the construction industry
Reading – in order to read and understand signs, workplace forms, and instructions and to make accurate reports.
Writing – in order to record details and to make reports using handwritten skills and computer skills
Oral communication – to employ reporting, communication and information-gathering techniques
Numeracy – to calculate risk rank for risk assessment
Other foundation skills essential to this course.
Reasonable adjustment explained
Reasonable adjustment refers to flexibility in assessment approaches to account for individual learning needs, while still adhering to the assessment requirements of the relevant training package or VET accredited course. Whilst reasonable adjustments can be made in terms of the way in which evidence of performance is gathered, the evidence criteria for making competent/not yet competent decisions should not be altered in any way.
If a student meets essential entry requirements, the RTO must endeavour to make ‘reasonable adjustments’ necessary for them to complete their course work or demonstrate competency. This may include adjusting the physical environment, student learning materials or the manner that a theory test is completed. In most situations, a student with a disability will be able to tell the RTO what he or she needs to be able to study. If necessary, the RTO should also seek advice from disability areas within government departments or organisations that represent or provide services to people with a disability.
Adjustments may include:
Modifying educational premises. For example, making ramps, modifying toilets and ensuring that classes are in rooms accessible to the person with a disability.
Modifying or providing equipment. For example, lowering lab benches, enlarging computer screens, providing specific computer software or an audio loop system.
Changing assessment procedures. For example, allowing for alternative examination methods such as oral exams, or allowing additional time for someone else to write an exam for a person with a disability.
Changing course delivery. For example, providing study notes or research materials in different formats or providing a sign language interpreter for a person who is hearing impaired.
Please note that in some Training Packages, first aid and CPR training for example, there are mandatory skills that cannot be modified as a reasonable adjustment. The student is required to complete 2 minutes of adult CPR on a manikin on the floor. There is no room for reasonable adjustment as it is stated as what is required in the Training Package.
ASSESSMENT – THEORY
Question paper – You will be assessed via SafeWork NSW mandated assessment:
Assessment Task One
21 Multiple choice and short answer questions (students write their answers in the assessment document provided by SafeWork NSW)
Assessment Task Two
Verbal answers to 10 oral questions (assessor completes a checklist in the assessment document provided by SafeWork NSW)
ASSESSMENT – PRACTICAL
Physical demonstrations (skills)
The simulated assessment environments will reflect the real-life working environment where these skills and knowledge would be performed, with all the relevant equipment and resources of that working environment. Skills must be demonstrated by the student working individually in an environment that provides realistic in-depth, industry-validated scenarios and simulations to assess students’ skills and knowledge.
It’s important that students have knowledge of the content of this course. The assessable practical skills are listed below.
You will be observed and assessed physically demonstrating correctly fitting PPE:
1. Eye protection,
2. Hearing protection.
3. Hard hat.
4. High visibility retro reflective vest.
5. Dust mask
Assessor records all results of the assessment in the compulsory mandated assessment document provided by SafeWork NSW
Student written agreement
If you are completing this course, please download the student agreement to ensure that you are aware of your rights and obligations. You can access the student written agreement by clicking here.
Course requirements
There are no prerequisite, entry, work-placement, licensing or certification requirements for this course.
We engage with industry experts
As part of ongoing improvement activities and industry consultations, Allens Training Pty Ltd consult with industry experts to ensure best practice occurs in resources and realistic assessment tools.
Training considerations from the trainer and assessor
The RTO’s training and assessment strategies and practices, including the amount of training they provide, are consistent with the requirements of training packages courses and enable each student to meet the requirements for each unit of competency or module in which they are enrolled.
RTO responsibilities
The RTO is required to:
a) Have qualified trainers and assessors to deliver the training and assessment.
b) Educational and support services to meet the needs of the student cohort/s undertaking the training and assessment.
c) Learning resources to enable students to meet the requirements for each unit of competency.
d) Facilities, whether physical or virtual, and equipment to accommodate and support the number of students undertaking the training and assessment.
Monitoring and improvement
Continuous improvement will occur through ongoing industry consultation, feedback from students, and feedback from clients. Feedback for this training program is collected through:
– Employer questionnaire managed by the Allens Training Pty Ltd head office.
– Every student is given the opportunity for post course survey and these survey results are available for both the trainer and RTO to view.
– Feedback is collected, analysed and actioned. Identified actions are documented.
